Mast · Yakima, WA
Security cameras, low voltage and smart home wiring in Yakima
Security cameras, low voltage runs and smart-home wiring planned alongside the line-voltage work, so the cameras have power and the cable has a path.
Chapter 01
Cameras fail at the power and the path
Most security camera trouble in Yakima homes has nothing to do with the camera. The unit gets mounted where the view is best, and then nobody can say where the power comes from. There is no outlet under the eave, so a cord gets taped along the siding and an extension cable runs out a window. The first wind, the first freeze or the first lawn mower finds it. A camera that goes dark at three in the morning is usually one of those two problems: the power gave out, or the cable path did.
Low voltage cable is thin, and it is easy to damage. Left exposed to sun, a cable jacket cracks within a few summers in the valley, and water follows the cable into the wall. Cable that runs close to line voltage wiring picks up noise. A good install keeps the cable inside the wall or in conduit, away from the power, with weather-rated connections where it has to go outside.
Castle is a licensed electrical contractor, Washington L&I license CASTLPE842NN, so the power side and the cable side are handled by the same crew. Call (509) 580-0470 and describe where you want the cameras.
Outbuilding with new conduit and a meter bank installed by Castle
Plan low voltage with the line voltage
Castle installs security cameras, low voltage systems and smart-home wiring. The cheapest time to run any of it is while a wall is open for something else. If the crew is already in the attic for a lighting job, adding a cable run to the front door takes minutes. Opened later, the same run is a patching job. So the electricians look at the whole house on the first visit: where the cameras go, where the network closet sits, where a smart thermostat or a keypad is wanted.
Planning together also settles the power question early. A camera over the garage door, a doorbell at the front step and a smart switch in the hall each need a power source, and it is easy to find out the panel has no room for the new circuit only after the cameras are on the wall. If the answer involves a new circuit or a panel upgrade, the crew can do that on the same visit.
Consultations are free and an estimate is typically ready within 48 hours. Rob Weaver, the owner, picks up the phone, and Jesus, Alex and Omar are the electricians customers name in their reviews. Jocelyn Tinoco wrote that Jesus let them know immediately when an unexpected issue came up and explained the options before moving ahead.
Chapter 03
Shops, farms and rentals
Cameras matter most where nobody is standing watch: a shop across the yard, a barn at the end of the lane, a rental unit, a pump house on a well that serves several homes. These are also the places with the longest cable runs and the oldest wiring. An outbuilding fed by an undersized line will not run a camera and a floodlight together, and a trench for a new feeder is the moment to lay low voltage cable alongside it. The photo above shows an outbuilding Castle fitted with new conduit and a meter bank.
Rental owners tell the same story in different words. Zeke Turner had a wiring issue at one of his rentals and wrote: "Rob and his guys got me taken care of the next day." A landlord who cannot be on site gets the most from cameras at the door and the meter, wired by someone who will answer the phone again.
Castle is also the Yakima crew that pulls and sets well pumps, so a camera at the pump house is a short extension of work the same company already does there. Customers in Selah, Naches, Moxee, Wapato, Zillah, Ellensburg and the rest of Yakima and Kittitas counties get the same crew, any hour of the day, seven days a week.
"It's clear that Rob and his team truly care about their customers and take pride in their work." Jocelyn Tinoco, Google review, 5 stars. Castle Pump & Electric holds Washington L&I electrical contractor license CASTLPE842NN.